1. 建好虚拟机后，添加一块网卡，因为 ESX 至少需要两块网卡。
2. 网卡必须为 "e1000"，需要修改虚拟机的 ***.vmx 配置文件，配置参数为：
ethernet0.virtualDev = "e1000"
3. 请添加以下参数，否则安装完毕后启动将慢得无法想象。
monitor_control.restrict_backdoor = TRUE
monitor_control.enable_svm = TRUE # for AMD CPU
或
monitor_control.vt32 = TRUE # for INTEL CPU
注意：monitor_control.vt32 和 monitor_control.enable_svm 两者只能选一，道理大家都明白。
例如:
……………..
floppy0.autodetect = "TRUE"
ethernet0.present = "TRUE"
ethernet0.virtualDev = "e1000"
ethernet0.wakeOnPcktRcv = "FALSE"
svga.autodetect = "TRUE"
mks.keyboardFilter = "allow"
displayName = "Red Hat Linux"
guestOS = "redhat"
nvram = "Red Hat Linux.nvram"
deploymentPlatform = "windows"
virtualHW.productCompatibility = "esx"
tools.upgrade.policy = "useGlobal"
monitor_control.restrict_backdoor = TRUE
monitor_control.vt32 = TRUE # for INTEL CPU